Extruder For B1, BX, Ender 3/ 3 V2/5/6, CR6/10

Extrusion method: Double gear extrusion

Maximum printing temperature: 270℃

Weight: 211g (including heating aluminum block, fan)

Maximum extrusion force: 7.5kg (depending on filaments)

Extrusion capacity (based on existing): 600mm³/min(depending on filaments)

Number of pulses: 932steps/mm for stepper motor drive at 16 subdivisions  (micro-steps) (further correction is required)

Recommended motor current: 800mA

Filaments’ diameter and tolerance: 1.75±0.05mm